head	1.7;
access;
symbols
	RELENG_3_0_0_RELEASE:1.4;
locks; strict;
comment	@# @;


1.7
date	98.12.30.07.47.53;	author kato;	state dead;
branches;
next	1.6;

1.6
date	98.10.22.16.16.02;	author bde;	state Exp;
branches;
next	1.5;

1.5
date	98.10.22.11.29.55;	author kato;	state Exp;
branches;
next	1.4;

1.4
date	98.10.13.08.14.33;	author kato;	state Exp;
branches;
next	1.3;

1.3
date	98.09.22.16.10.40;	author kato;	state Exp;
branches;
next	1.2;

1.2
date	98.09.15.08.25.09;	author kato;	state Exp;
branches;
next	1.1;

1.1
date	98.09.05.08.14.36;	author jb;	state Exp;
branches;
next	;


desc
@@


1.7
log
@Removed GENERICupgrade file.
@
text
@#
# GENERICupgrade (a copy of GENERIC98)
#
# This config file is used by the aout->elf transition build on systems
# not running a 3.0-CURRENT kernel. Unless a kernel is built and installed
# as part of the upgrade, the system will be hosed by the installation
# of the 3.0 binaries and subsequent reboot. If the transition build is
# being perfomed on a machine for which this config file is inappropriate,
# it should be replaced with a suitable one prior to performing the upgrade.
#
#	$Id: GENERICupgrade,v 1.6 1998/10/22 16:16:02 bde Exp $
#

machine		"pc98"
cpu		"I386_CPU"
cpu		"I486_CPU"
cpu		"I586_CPU"
cpu		"I686_CPU"
ident		"GENERIC98"
maxusers	32

options		"PC98"			#PC98
options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		"CD9660_ROOT"		#CD-ROM usable as root device
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		NFS_ROOT		#NFS usable as root device
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		SCSI_DELAY=15		#Be pessimistic about Joe SCSI device
options		EPSON_BOUNCEDMA		#use bounce buufer for 15-16M
#options		EPSON_MEMWIN		#EPSON memory window support
options		UCONSOLE		#Allow users to grab the console
options		"LINE30"
options		FAILSAFE		#Be conservative
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

options		SYSVSHM			
options		SYSVSEM
options		SYSVMSG

options		COM_MULTIPORT

#
#	IBM-PC HDD support
#options	COMPAT_ATDISK

config		kernel	root on wd0

controller	isa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 11 drq 2
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
disk		fd2	at fdc0 drive 2
disk		fd3	at fdc0 drive 3
tape		ft0	at fdc0 drive 4

# options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 9
disk		wd0	at wdc0 drive 0
#disk		wd1	at wdc0 drive 1
#disk		wd2	at wdc0 drive 2
#disk		wd3	at wdc0 drive 3

options		ATAPI	# Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		wcd0	#IDE CD-ROM

# A single entry for any of these controllers (ncr, ahb, ahc) is sufficient
# for any number of installed devices.
controller	ncr0
#controller	amd0
controller	ahc0
controller	isp0

#
# WD33C93 SCSI card (55/92 like board)
#

options	BS_TARG_SAFEMODE

# PC-9801-92
#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0
# SC-98
# controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x10000
# HA-55BS2 and later
#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x20000
# ELECOM type
#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x30000
# SMIT
#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000
# Logitec LHA-20x
#controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x50000

#controller	aic0	at isa? port 0x1840 bio irq 5 flags 0x10000

controller	scbus0

device		da0

device		sa0

device		pass0

device		cd0	#Only need one of these, the code dynamically grows

controller	matcd0	at isa? port? bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port IO_KBD tty irq 1
#options		XSERVER			# support for X server

device		npx0	at isa? port IO_NPX irq 8

#
# Laptop support (see LINT for more options)
#
device		apm0    at isa?	disable	flags 0x31 # Advanced Power Management

# PCCARD (PCMCIA) support
#controller	card0
#device		pcic0	at card?
#device		pcic1	at card?

device		sio0	at isa? port "IO_COM1" tty irq 4
device		sio1	at isa? port 0xd2  tty irq 5 flags 0x101
device		sio2	at isa? port 0x8d2 tty flags 0x101

device		lpt0	at isa? port IO_LPT  tty
device		mse0	at isa? port IO_MSE tty irq 13

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device fxp0
device rl0
device tl0
device tx0
device vx0

#
# DP8390 NIC
#
# ed0: generic driver
# ed1: LANEED LD-BDN
# ed2: EGY-98
# ed3: LGY-98
# ed4: ICM-IF-2766/EN-2298-T
# ed5: SIC-98
# ed6: PC-9801-108
# ed7: LA-98
# ed8: C-NET(98)
# ed9: C-NET(98)E/L
# fe0: RE1000/1000Plus
# fe1: C-NET(98)P2/C-NET(9N)E
#
device ed0 at isa? port 0x00d0 net irq 6
device ed1 at isa? port 0x00d8 net irq 6 flags 0x200000
device ed2 at isa? port 0x00d8 net irq 6 flags 0x300000
device ed3 at isa? port 0x00d0 net irq 6 flags 0x400000
device ed4 at isa? port 0x56d0 net irq 5 flags 0x500000
device ed5 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000
device ed6 at isa? port 0x0770 net irq 6 flags 0x800000
device ed7 at isa? port 0x00d0 net irq 6 flags 0x900000
device ed8 at isa? port 0xa3d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000
device ed9 at isa? port 0x03d0 net irq 6 flags 0xb00000

device ep0 at isa? port 0x40d0 net irq 3
device fe0 at isa? port 0x00d0 net irq 3
device fe1 at isa? port 0x73d0 net irq 5
device lnc0 at isa? port 0x03d0 net irq 6
device zp0 at isa? port 0x00d0 net irq 10 iomem 0xe0000

#controller	snd0
#device	sb0	at isa? port 0x20d2 irq 10 conflicts drq 3
#device	sbxvi0 	at isa? drq 3
#device	sbmidi0	at isa? port 0x80d2
#device	opl0	at isa? port 0x28d2
#device pcm0    at isa? port 0xa460 irq 12
#device	mss0	at isa? port 0xf40 irq 12 drq 1

pseudo-device	loop
pseudo-device	ether
pseudo-device	sl	1
pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

@


1.6
log
@Removed all `vector xxxintr' specifications.  Interrupt handlers are now
configured in drivers.

Don't quote port names that don't have a digit in them.
@
text
@d11 1
a11 1
#	$Id: GENERICupgrade,v 1.5 1998/10/22 11:29:55 kato Exp $
@


1.5
log
@Added rl driver.
@
text
@d11 1
a11 1
#	$Id: GENERICupgrade,v 1.4 1998/10/13 08:14:33 kato Exp $
d58 1
a58 1
controller	fdc0	at isa? port "IO_FD1" bio irq 11 drq 2 vector fdintr
d66 1
a66 1
controller	wdc0	at isa? port "IO_WD1" bio irq 9 vector wdintr
d90 1
a90 1
#controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0 vector bsintr
d92 1
a92 1
# controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x10000 vector bsintr
d94 1
a94 1
#controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x20000 vector bsintr
d96 1
a96 1
#controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x30000 vector bsintr
d98 1
a98 1
#controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 vector bsintr
d100 1
a100 1
#controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x50000 vector bsintr
d102 1
a102 1
#controller	aic0	at isa? port 0x1840 bio irq 5 flags 0x10000 vector aicintr
d117 1
a117 1
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
d120 1
a120 1
device		npx0	at isa? port "IO_NPX" irq 8 vector npxintr
d132 3
a134 3
device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port 0xd2  tty irq 5 flags 0x101 vector siointr
device		sio2	at isa? port 0x8d2 tty flags 0x101 vector siointr
d136 2
a137 2
device		lpt0	at isa? port "IO_LPT"  tty
device		mse0	at isa? port "IO_MSE" tty irq 13 vector mseintr
d166 16
a181 16
device ed0 at isa? port 0x00d0 net irq 6 vector edintr
device ed1 at isa? port 0x00d8 net irq 6 flags 0x200000 vector edintr
device ed2 at isa? port 0x00d8 net irq 6 flags 0x300000 vector edintr
device ed3 at isa? port 0x00d0 net irq 6 flags 0x400000 vector edintr
device ed4 at isa? port 0x56d0 net irq 5 flags 0x500000 vector edintr
device ed5 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 vector edintr
device ed6 at isa? port 0x0770 net irq 6 flags 0x800000 vector edintr
device ed7 at isa? port 0x00d0 net irq 6 flags 0x900000 vector edintr
device ed8 at isa? port 0xa3d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 vector edintr
device ed9 at isa? port 0x03d0 net irq 6 flags 0xb00000 vector edintr

device ep0 at isa? port 0x40d0 net irq 3 vector epintr
device fe0 at isa? port 0x00d0 net irq 3 vector feintr
device fe1 at isa? port 0x73d0 net irq 5 vector feintr
device lnc0 at isa? port 0x03d0 net irq 6 vector lncintr
device zp0 at isa? port 0x00d0 net irq 10 iomem 0xe0000 vector zpintr 
d184 1
a184 1
#device	sb0	at isa? port 0x20d2 irq 10 conflicts drq 3 vector sbintr
d188 2
a189 2
#device pcm0    at isa? port 0xa460 irq 12 vector pcmintr
#device	mss0	at isa? port 0xf40 irq 12 drq 1 vector adintr
@


1.4
log
@Commented out aic driver.
@
text
@d11 1
a11 1
#	$Id: GENERICupgrade,v 1.3 1998/09/22 16:10:40 kato Exp $
a13 2
# GENERIC98 -- Generic PC98 machine with WD/SCSI disks

d145 1
@


1.3
log
@Sync with sys/i386/conf/GENERICupgrade revision 1.3.
@
text
@d11 1
a11 1
#	$Id: GENERICupgrade,v 1.2 1998/09/15 08:25:09 kato Exp $
d104 1
a104 1
controller	aic0	at isa? port 0x1840 bio irq 5 flags 0x10000 vector aicintr
@


1.2
log
@Deleted DDB and DIAGNOSTIC options.
@
text
@d11 1
a11 1
#	$Id: GENERICupgrade,v 1.1 1998/09/05 08:14:36 jb Exp $
a36 1
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
d81 1
a81 1
controller	amd0
d92 1
a92 1
controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0 vector bsintr
d108 1
a108 1
device		sd0
d110 1
a110 1
device		od0	#See LINT for possible `od' options.
d112 1
a112 1
device		st0
@


1.1
log
@Add a GENERICupgrade config file for pc98 users to upgrade to elf
in the same way as i386 users. This is a copy of GENERIC98.
@
text
@d11 1
a11 1
#	$Id: GENERICupgrade,v 1.1 1998/08/30 03:06:23 jb Exp $
a54 7
#
#	FreeBSD(98)-current is a *TEST VERSION*.  
#	It is highly recomended to compile with following options, and to
#	record the panic messages and the result of trace command brefore 
#	reporting a problem.
options		DDB
options		DIAGNOSTIC
@
