head	1.46;
access;
symbols
	RELENG_8_4:1.45.0.2
	RELENG_9_1_0_RELEASE:1.41.2.1.4.2
	RELENG_9_1:1.41.2.1.0.4
	RELENG_9_1_BP:1.41.2.1
	RELENG_8_3_0_RELEASE:1.33.2.1.8.1
	RELENG_8_3:1.33.2.1.0.8
	RELENG_8_3_BP:1.33.2.1
	RELENG_9_0_0_RELEASE:1.41.2.1.2.1
	RELENG_9_0:1.41.2.1.0.2
	RELENG_9_0_BP:1.41.2.1
	RELENG_9:1.41.0.2
	RELENG_9_BP:1.41
	RELENG_7_4_0_RELEASE:1.6.2.3.6.1
	RELENG_8_2_0_RELEASE:1.33.2.1.6.1
	RELENG_7_4:1.6.2.3.0.6
	RELENG_7_4_BP:1.6.2.3
	RELENG_8_2:1.33.2.1.0.6
	RELENG_8_2_BP:1.33.2.1
	RELENG_8_1_0_RELEASE:1.33.2.1.4.1
	RELENG_8_1:1.33.2.1.0.4
	RELENG_8_1_BP:1.33.2.1
	RELENG_7_3_0_RELEASE:1.6.2.3.4.1
	RELENG_7_3:1.6.2.3.0.4
	RELENG_7_3_BP:1.6.2.3
	RELENG_8_0_0_RELEASE:1.33.2.1.2.1
	RELENG_8_0:1.33.2.1.0.2
	RELENG_8_0_BP:1.33.2.1
	RELENG_8:1.33.0.2
	RELENG_8_BP:1.33
	RELENG_7_2_0_RELEASE:1.6.2.3.2.1
	RELENG_7_2:1.6.2.3.0.2
	RELENG_7_2_BP:1.6.2.3
	RELENG_7_1_0_RELEASE:1.6.2.1.2.1
	RELENG_6_4_0_RELEASE:1.3.2.3.2.1
	RELENG_7_1:1.6.2.1.0.2
	RELENG_7_1_BP:1.6.2.1
	RELENG_6_4:1.3.2.3.0.2
	RELENG_6_4_BP:1.3.2.3
	RELENG_7_0_0_RELEASE:1.6
	RELENG_6_3_0_RELEASE:1.3.2.2
	RELENG_7_0:1.6.0.4
	RELENG_7_0_BP:1.6
	RELENG_6_3:1.3.2.2.0.2
	RELENG_6_3_BP:1.3.2.2
	RELENG_7:1.6.0.2
	RELENG_7_BP:1.6
	RELENG_6:1.3.0.2;
locks; strict;
comment	@# @;


1.46
date	2013.04.05.00.25.42;	author svnexp;	state Exp;
branches;
next	1.45;

1.45
date	2012.11.17.01.51.08;	author svnexp;	state Exp;
branches
	1.45.2.1;
next	1.44;

1.44
date	2012.08.26.01.21.02;	author gjb;	state Exp;
branches;
next	1.43;

1.43
date	2012.06.13.04.40.29;	author imp;	state Exp;
branches;
next	1.42;

1.42
date	2012.03.21.08.38.42;	author ed;	state Exp;
branches;
next	1.41;

1.41
date	2011.08.07.20.16.46;	author rmacklem;	state Exp;
branches
	1.41.2.1;
next	1.40;

1.40
date	2011.04.24.08.58.58;	author mav;	state Exp;
branches;
next	1.39;

1.39
date	2011.03.31.08.07.13;	author adrian;	state Exp;
branches;
next	1.38;

1.38
date	2010.11.07.20.33.39;	author thompsa;	state Exp;
branches;
next	1.37;

1.37
date	2010.02.15.23.44.48;	author attilio;	state Exp;
branches;
next	1.36;

1.36
date	2010.02.10.16.30.04;	author attilio;	state Exp;
branches;
next	1.35;

1.35
date	2009.12.23.23.16.54;	author rpaulo;	state Exp;
branches;
next	1.34;

1.34
date	2009.12.02.00.38.11;	author thompsa;	state Exp;
branches;
next	1.33;

1.33
date	2009.07.17.18.35.45;	author rpaulo;	state Exp;
branches
	1.33.2.1;
next	1.32;

1.32
date	2009.05.27.16.16.56;	author thompsa;	state Exp;
branches;
next	1.31;

1.31
date	2009.05.10.00.00.25;	author kuriyama;	state Exp;
branches;
next	1.30;

1.30
date	2009.03.30.21.54.39;	author sam;	state Exp;
branches;
next	1.29;

1.29
date	2009.03.30.21.53.27;	author sam;	state Exp;
branches;
next	1.28;

1.28
date	2009.03.30.19.23.49;	author sam;	state Exp;
branches;
next	1.27;

1.27
date	2009.03.09.23.25.34;	author sam;	state Exp;
branches;
next	1.26;

1.26
date	2009.03.06.23.27.47;	author sam;	state Exp;
branches;
next	1.25;

1.25
date	2009.03.06.23.26.50;	author sam;	state Exp;
branches;
next	1.24;

1.24
date	2009.02.23.18.34.56;	author thompsa;	state Exp;
branches;
next	1.23;

1.23
date	2009.02.18.01.37.57;	author sam;	state Exp;
branches;
next	1.22;

1.22
date	2009.02.03.19.16.04;	author sam;	state Exp;
branches;
next	1.21;

1.21
date	2008.12.27.17.22.17;	author bz;	state Exp;
branches;
next	1.20;

1.20
date	2008.12.20.03.26.09;	author sam;	state Exp;
branches;
next	1.19;

1.19
date	2008.12.01.16.53.01;	author sam;	state Exp;
branches;
next	1.18;

1.18
date	2008.11.30.17.53.19;	author sam;	state Exp;
branches;
next	1.17;

1.17
date	2008.10.23.01.51.55;	author marcel;	state Exp;
branches;
next	1.16;

1.16
date	2008.08.02.22.53.43;	author imp;	state Exp;
branches;
next	1.15;

1.15
date	2008.08.02.07.20.30;	author imp;	state Exp;
branches;
next	1.14;

1.14
date	2008.08.02.07.18.12;	author imp;	state Exp;
branches;
next	1.13;

1.13
date	2008.04.21.10.09.54;	author phk;	state Exp;
branches;
next	1.12;

1.12
date	2008.04.20.20.35.34;	author sam;	state Exp;
branches;
next	1.11;

1.11
date	2008.03.27.11.54.17;	author dfr;	state Exp;
branches;
next	1.10;

1.10
date	2008.03.20.17.44.58;	author sam;	state Exp;
branches;
next	1.9;

1.9
date	2008.03.12.10.11.55;	author jeff;	state Exp;
branches;
next	1.8;

1.8
date	2008.03.05.07.55.45;	author kevlo;	state Exp;
branches;
next	1.7;

1.7
date	2007.12.02.13.10.41;	author cognet;	state Exp;
branches;
next	1.6;

1.6
date	2007.09.27.22.39.49;	author cognet;	state Exp;
branches
	1.6.2.1;
next	1.5;

1.5
date	2007.09.27.21.18.33;	author cognet;	state Exp;
branches;
next	1.4;

1.4
date	2007.05.24.16.27.48;	author sam;	state Exp;
branches;
next	1.3;

1.3
date	2007.02.26.02.04.24;	author cognet;	state Exp;
branches
	1.3.2.1;
next	1.2;

1.2
date	2006.11.22.12.57.17;	author kevlo;	state Exp;
branches;
next	1.1;

1.1
date	2006.11.19.23.58.12;	author sam;	state Exp;
branches;
next	;

1.45.2.1
date	2012.11.17.01.51.08;	author svnexp;	state dead;
branches;
next	1.45.2.2;

1.45.2.2
date	2013.03.28.13.03.58;	author svnexp;	state Exp;
branches;
next	;

1.41.2.1
date	2011.09.23.00.51.37;	author kensmith;	state Exp;
branches
	1.41.2.1.2.1
	1.41.2.1.4.1;
next	1.41.2.2;

1.41.2.2
date	2012.08.29.15.38.18;	author gjb;	state Exp;
branches;
next	1.41.2.3;

1.41.2.3
date	2012.11.17.11.36.45;	author svnexp;	state Exp;
branches;
next	;

1.41.2.1.2.1
date	2011.11.11.04.20.22;	author kensmith;	state Exp;
branches;
next	1.41.2.1.2.2;

1.41.2.1.2.2
date	2012.11.17.08.36.44;	author svnexp;	state Exp;
branches;
next	;

1.41.2.1.4.1
date	2012.08.05.23.54.33;	author kensmith;	state Exp;
branches;
next	1.41.2.1.4.2;

1.41.2.1.4.2
date	2012.11.17.08.47.34;	author svnexp;	state Exp;
branches;
next	;

1.33.2.1
date	2009.08.03.08.13.06;	author kensmith;	state Exp;
branches
	1.33.2.1.2.1
	1.33.2.1.4.1
	1.33.2.1.6.1
	1.33.2.1.8.1;
next	1.33.2.2;

1.33.2.2
date	2012.11.17.10.36.25;	author svnexp;	state Exp;
branches;
next	;

1.33.2.1.2.1
date	2009.10.25.01.10.29;	author kensmith;	state Exp;
branches;
next	;

1.33.2.1.4.1
date	2010.06.14.02.09.06;	author kensmith;	state Exp;
branches;
next	;

1.33.2.1.6.1
date	2010.12.21.17.09.25;	author kensmith;	state Exp;
branches;
next	;

1.33.2.1.8.1
date	2012.03.03.06.15.13;	author kensmith;	state Exp;
branches;
next	1.33.2.1.8.2;

1.33.2.1.8.2
date	2012.11.17.08.25.05;	author svnexp;	state Exp;
branches;
next	;

1.6.2.1
date	2008.04.10.09.39.21;	author dfr;	state Exp;
branches
	1.6.2.1.2.1;
next	1.6.2.2;

1.6.2.2
date	2009.01.12.19.16.00;	author sam;	state Exp;
branches;
next	1.6.2.3;

1.6.2.3
date	2009.03.12.03.09.11;	author bms;	state Exp;
branches
	1.6.2.3.2.1
	1.6.2.3.4.1
	1.6.2.3.6.1;
next	1.6.2.4;

1.6.2.4
date	2012.11.17.08.04.42;	author svnexp;	state Exp;
branches;
next	;

1.6.2.1.2.1
date	2008.11.25.02.59.29;	author kensmith;	state Exp;
branches;
next	;

1.6.2.3.2.1
date	2009.04.15.03.14.26;	author kensmith;	state Exp;
branches;
next	;

1.6.2.3.4.1
date	2010.02.10.00.26.20;	author kensmith;	state Exp;
branches;
next	;

1.6.2.3.6.1
date	2010.12.21.17.10.29;	author kensmith;	state Exp;
branches;
next	1.6.2.3.6.2;

1.6.2.3.6.2
date	2012.11.17.08.17.03;	author svnexp;	state Exp;
branches;
next	;

1.3.2.1
date	2007.02.26.23.13.08;	author cognet;	state Exp;
branches;
next	1.3.2.2;

1.3.2.2
date	2007.02.27.00.27.50;	author cognet;	state Exp;
branches;
next	1.3.2.3;

1.3.2.3
date	2008.04.24.10.46.17;	author dfr;	state Exp;
branches
	1.3.2.3.2.1;
next	1.3.2.4;

1.3.2.4
date	2012.11.17.07.42.27;	author svnexp;	state Exp;
branches;
next	;

1.3.2.3.2.1
date	2008.10.02.02.57.24;	author kensmith;	state Exp;
branches;
next	;


desc
@@


1.46
log
@## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/249083
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
@
text
@# AVILA -- Gateworks Avila XScale board
# kernel configuration file for FreeBSD/arm
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: head/sys/arm/conf/AVILA 249083 2013-04-04 07:12:24Z mav $

ident		AVILA

include		"../xscale/ixp425/std.ixp425"
# NB: memory mapping is defined in std.avila
include		"../xscale/ixp425/std.avila"
options 	XSCALE_CACHE_READ_WRITE_ALLOCATE
#options 	ARM_USE_SMALL_ALLOC
#To statically compile in device wiring instead of /boot/device.hints
hints		"AVILA.hints"		#Default places to look for devices.
makeoptions	MODULES_OVERRIDE=""

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
makeoptions	CONF_CFLAGS=-mcpu=xscale
#options 	HZ=1000
options 	HZ=100
options 	DEVICE_POLLING

# Debugging for use in -current
options 	KDB
#options 	GDB
options 	DDB			#Enable the kernel debugger
#options 	DEADLKRES		#Enable the deadlock resolver
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
#options 	WITNESS			#Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
#options 	DIAGNOSTIC

options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	NFSCL			#New Network Filesystem Client
options 	NFS_ROOT		#NFS usable as /, requires NFSCL
options 	BOOTP
options 	BOOTP_NFSROOT
options 	BOOTP_NFSV3
options 	BOOTP_WIRED_TO=npe0
#options 	BOOTP_WIRED_TO=ath0
#options 	BOOTP_WIRED_TO=rl0
options 	BOOTP_COMPAT
#options 	PREEMPTION
#options 	VERBOSE_SYSINIT

# Hardware performance counters
options 	HWPMC_HOOKS
device		hwpmc

#device		saarm

device		pci
device		uart

device		ixpwdog		# watchdog timer
device		cfi		# flash support
device		cfid		# flash disk support
device		geom_redboot	# redboot fis parser

# I2C Bus
device		iicbus
device		iicbb
device		iic

device		ixpiic		# I2C bus glue
device		ds1672		# DS1672 on I2C bus
device		ad7418		# AD7418 on I2C bus

device		avila_led

device		gpio
device		gpioled
device		avila_gpio	# GPIO pins on J8

device		ata
device		avila_ata	# Gateworks CF/IDE support

device		npe		# Network Processing Engine
device		npe_fw
device		firmware
device		qmgr		# Q Manager (required by npe)
device		mii		# NB: required by npe
device		ether
device		bpf

device		loop
device		if_bridge

device		md
device		random		# Entropy device

# Wireless NIC cards
device		wlan		# 802.11 support
options 	IEEE80211_DEBUG
options 	IEEE80211_SUPPORT_TDMA
options 	IEEE80211_SUPPORT_MESH
device		wlan_wep	# 802.11 WEP support
device		wlan_ccmp	# 802.11 CCMP support
device		wlan_tkip	# 802.11 TKIP support
device		wlan_xauth

device		ath		# Atheros NICs
device		ath_pci		# Atheros pci/cardbus glue
options 	ATH_DEBUG
options 	ATH_DIAGAPI
#options 	ATH_TX99_DIAG
device		ath_rate_sample	# SampleRate tx rate control for ath

#options 	AH_DEBUG
#options 	AH_ASSERT
#device		ath_ar5210
#device		ath_ar5211
device		ath_ar5212
device		ath_rf2413
device		ath_rf2417
device		ath_rf2425
device		ath_rf5111
device		ath_rf5112
device		ath_rf5413
#
device		ath_ar5416
options 	AH_SUPPORT_AR5416
device		ath_ar9160
device		ath_ar9280

device		usb
#options 	USB_DEBUG
device		ohci
device		ehci
device		umass
device		scbus		# SCSI bus (required for ATA/SCSI)
device		da		# Direct Access (disks)
device		pass		# Passthrough device (direct ATA/SCSI access)

#device		ural
#device		zyd
#device		wlan_amrr
@


1.45
log
@Switching exporter and resync
@
text
@d19 1
a19 1
# $FreeBSD: head/sys/arm/conf/AVILA 239699 2012-08-26 01:21:02Z gjb $
a95 1
options 	ATA_CAM
@


1.45.2.1
log
@file AVILA was added on branch RELENG_8_4 on 2013-03-28 13:03:58 +0000
@
text
@d1 157
@


1.45.2.2
log
@## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/248810
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
@
text
@a0 146
# AVILA -- Gateworks Avila XScale board
# kernel configuration file for FreeBSD/arm
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD: releng/8.4/sys/arm/conf/AVILA 195742 2009-07-17 18:35:45Z rpaulo $

ident		AVILA

include		"../xscale/ixp425/std.ixp425"
# NB: memory mapping is defined in std.avila
include		"../xscale/ixp425/std.avila"
options 	XSCALE_CACHE_READ_WRITE_ALLOCATE
#options 	ARM_USE_SMALL_ALLOC
#To statically compile in device wiring instead of /boot/device.hints
hints		"AVILA.hints"		#Default places to look for devices.
makeoptions	MODULES_OVERRIDE=""

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
makeoptions	CONF_CFLAGS=-mcpu=xscale
#options 	HZ=1000
options 	HZ=100
options 	DEVICE_POLLING

# Debugging for use in -current
options 	KDB
#options 	GDB
options 	DDB			#Enable the kernel debugger
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
#options 	WITNESS			#Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
#options 	DIAGNOSTIC

options 	SCHED_4BSD		#4BSD scheduler
options 	INET			#InterNETworking
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	NFSCLIENT		#Network Filesystem Client
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
options 	BOOTP
options 	BOOTP_NFSROOT
options 	BOOTP_NFSV3
options 	BOOTP_WIRED_TO=npe0
#options 	BOOTP_WIRED_TO=ath0
#options 	BOOTP_WIRED_TO=rl0
options 	BOOTP_COMPAT
#options 	PREEMPTION
#options 	VERBOSE_SYSINIT

#device		saarm

device		pci
device		uart

device		ixpwdog		# watchdog timer
device		cfi		# flash support
device		cfid		# flash disk support
device		geom_redboot	# redboot fis parser

# I2C Bus
device		iicbus
device		iicbb
device		iic

device		ixpiic		# I2C bus glue
device		ds1672		# DS1672 on I2C bus
device		ad7418		# AD7418 on I2C bus

device		avila_led

device		ata
device		atadisk         # ATA disk drives
device		avila_ata	# Gateworks CF/IDE support

device		npe		# Network Processing Engine
device		npe_fw
device		firmware
device		qmgr		# Q Manager (required by npe)
device		mii		# NB: required by npe
device		ether
device		bpf

device		pty
device		loop
device		if_bridge

device		md
device		random		# Entropy device

# Wireless NIC cards
device		wlan		# 802.11 support
options 	IEEE80211_DEBUG
options 	IEEE80211_SUPPORT_TDMA
options 	IEEE80211_SUPPORT_MESH
device		wlan_wep	# 802.11 WEP support
device		wlan_ccmp	# 802.11 CCMP support
device		wlan_tkip	# 802.11 TKIP support
device		wlan_xauth

device		ath		# Atheros pci/cardbus NIC's
options 	ATH_DEBUG
options 	ATH_DIAGAPI
#options 	ATH_TX99_DIAG
device		ath_rate_sample	# SampleRate tx rate control for ath

#options 	AH_DEBUG
#options 	AH_ASSERT
#device		ath_ar5210
#device		ath_ar5211
device		ath_ar5212
device		ath_rf2413
device		ath_rf2417
device		ath_rf2425
device		ath_rf5111
device		ath_rf5112
device		ath_rf5413
#
device		ath_ar5416
options 	AH_SUPPORT_AR5416
device		ath_ar9160

device		usb
#options 	USB_DEBUG
device		ohci
device		ehci
device		umass
device		scbus		# SCSI bus (required for SCSI)
device		da		# Direct Access (disks)

#device		ural
#device		zyd
#device		wlan_amrr
@


1.44
log
@SVN rev 239699 on 2012-08-26 01:21:02Z by gjb

Grammar fix: s/NIC's/NICs/

MFC after:	3 days
@
text
@d19 1
a19 1
# $FreeBSD$
@


1.43
log
@SVN rev 236988 on 2012-06-13 04:40:29Z by imp

Strip trailing whitespace.
@
text
@d122 1
a122 1
device		ath		# Atheros NIC's
@


1.42
log
@SVN rev 233271 on 2012-03-21 08:38:42Z by ed

Remove pty(4) from our kernel configurations.

As of FreeBSD 8, this driver should not be used. Applications that use
posix_openpt(2) and openpty(3) use the pts(4) that is built into the
kernel unconditionally. If it turns out high profile depend on the
pty(4) module anyway, I'd rather get those fixed. So please report any
issues to me.

The pty(4) module is still available as a kernel module of course, so a
simple `kldload pty' can be used to run old-style pseudo-terminals.
@
text
@d15 2
a16 2
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
@


1.41
log
@SVN rev 224699 on 2011-08-07 20:16:46Z by rmacklem

Change all the sample kernel configurations to use
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.

Approved by:	re (hrs)
@
text
@a105 1
device		pty
@


1.41.2.1
log
@SVN rev 225736 on 2011-09-23 00:51:37Z by kensmith

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by:	re (implicit)
@
text
@@


1.41.2.1.4.1
log
@SVN rev 239080 on 2012-08-05 23:54:33Z by kensmith

Copy stable/9 to releng/9.1 as part of the 9.1-RELEASE release process.

Approved by:	re (implicit)
@
text
@@


1.41.2.1.4.2
log
@Switch importer
@
text
@d19 1
a19 1
# $FreeBSD: releng/9.1/sys/arm/conf/AVILA 224699 2011-08-07 20:16:46Z rmacklem $
@


1.41.2.2
log
@SVN rev 239841 on 2012-08-29 15:38:18Z by gjb

MFC r239699:

 - Grammar fix: s/NIC's/NICs/
@
text
@d123 1
a123 1
device		ath		# Atheros NICs
@


1.41.2.3
log
@## SVN ##
## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/ 242902
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ## r242902 | dteske | 2012-11-11 23:29:45 +0000 (Sun, 11 Nov 2012) | 10 lines
## SVN ##
## SVN ## Fix a regression introduced by SVN r211417 that saw the breakage of a feature
## SVN ## documented in usr.sbin/sysinstall/help/shortcuts.hlp (reproduced below):
## SVN ##
## SVN ## If /usr/sbin/sysinstall is linked to another filename, say
## SVN ## `/usr/local/bin/configPackages', then the basename will be used
## SVN ## as an implicit command name.
## SVN ##
## SVN ## Reviewed by:	adrian (co-mentor)
## SVN ## Approved by:	adrian (co-mentor)
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ##
@
text
@d19 1
a19 1
# $FreeBSD: stable/9/sys/arm/conf/AVILA 239841 2012-08-29 15:38:18Z gjb $
@


1.41.2.1.2.1
log
@SVN rev 227445 on 2011-11-11 04:20:22Z by kensmith

Copy stable/9 to releng/9.0 as part of the FreeBSD 9.0-RELEASE release
cycle.

Approved by:	re (implicit)
@
text
@@


1.41.2.1.2.2
log
@Switch importer
@
text
@d19 1
a19 1
# $FreeBSD: releng/9.0/sys/arm/conf/AVILA 224699 2011-08-07 20:16:46Z rmacklem $
@


1.40
log
@SVN rev 220982 on 2011-04-24 08:58:58Z by mav

Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
@
text
@d53 2
a54 2
options 	NFSCLIENT		#Network Filesystem Client
options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
@


1.39
log
@SVN rev 220185 on 2011-03-31 08:07:13Z by adrian

Break out the ath PCI logic into a separate device/module.

Introduce the AHB glue for Atheros embedded systems. Right now it's
hard-coded for the AR9130 chip whose support isn't yet in this HAL;
it'll be added in a subsequent commit.

Kernel configuration files now need both 'ath' and 'ath_pci' devices; both
modules need to be loaded for the ath device to work.
@
text
@a94 1
device		atadisk         # ATA disk drives
d96 1
d152 1
a152 1
device		scbus		# SCSI bus (required for SCSI)
d154 1
@


1.38
log
@SVN rev 214946 on 2010-11-07 20:33:39Z by thompsa

Hook up the five gpio pins on the Avila board to the gpio framework. There are
actually 16 I/O lines but the other ones are used for system devices and
interrupts.

The IXP4XX platform can set interrupts on these pins for
high/low/rising/falling/transitional but this is not implemented yet.

The Cambria has the same interface but as all the pins are assigned to system
functions the gpio header is toggled via a PLD on the i2c bus and is not
supported by this commit.
@
text
@d123 2
a124 1
device		ath		# Atheros pci/cardbus NIC's
@


1.37
log
@SVN rev 203938 on 2010-02-15 23:44:48Z by attilio

Adjust style (following the already existing rules) for the newly
introduced option DEADLKRES.

Reported by:	danfe, julian, avg
@
text
@d90 4
@


1.36
log
@SVN rev 203758 on 2010-02-10 16:30:04Z by attilio

Add the options DEADLKRES (introducing the deadlock resolver thread) in
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.

Sponsored by:	Sandvine Incorporated
Requested by:	emaste
Discussed with:	kib
@
text
@d42 1
a42 1
#options	DEADLKRES		#Enable the deadlock resolver
@


1.35
log
@SVN rev 200928 on 2009-12-23 23:16:54Z by rpaulo

Intel XScale hwpmc(4) support.

This brings hwpmc(4) support for 2nd and 3rd generation XScale cores.
Right now it's enabled by default to make sure we test this a bit.
When the time comes it can be disabled by default.
Tested on Gateworks boards.

A man page is coming.

Obtained from:	//depot/user/rpaulo/xscalepmc/...
@
text
@d42 1
@


1.34
log
@SVN rev 200015 on 2009-12-02 00:38:11Z by thompsa

Add missing ath_ar9* ath hal entries.
@
text
@d64 4
@


1.33
log
@SVN rev 195742 on 2009-07-17 18:35:45Z by rpaulo

Add IEEE80211_SUPPORT_MESH, following similar change to nanobsd and
other GENERIC kernels.

Approved by:	re (kib)
@
text
@d135 1
@


1.33.2.1
log
@SVN rev 196045 on 2009-08-03 08:13:06Z by kensmith

Copy head to stable/8 as part of 8.0 Release cycle.

Approved by:	re (Implicit)
@
text
@@


1.33.2.2
log
@## SVN ##
## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/ 242909
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ## r242909 | dim | 2012-11-12 07:47:19 +0000 (Mon, 12 Nov 2012) | 20 lines
## SVN ##
## SVN ## MFC r242625:
## SVN ##
## SVN ## Remove duplicate const specifiers in many drivers (I hope I got all of
## SVN ## them, please let me know if not).  Most of these are of the form:
## SVN ##
## SVN ## static const struct bzzt_type {
## SVN ##       [...list of members...]
## SVN ## } const bzzt_devs[] = {
## SVN ##       [...list of initializers...]
## SVN ## };
## SVN ##
## SVN ## The second const is unnecessary, as arrays cannot be modified anyway,
## SVN ## and if the elements are const, the whole thing is const automatically
## SVN ## (e.g. it is placed in .rodata).
## SVN ##
## SVN ## I have verified this does not change the binary output of a full kernel
## SVN ## build (except for build timestamps embedded in the object files).
## SVN ##
## SVN ## Reviewed by:	yongari, marius
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ##
@
text
@d19 1
a19 1
# $FreeBSD: stable/8/sys/arm/conf/AVILA 195742 2009-07-17 18:35:45Z rpaulo $
@


1.33.2.1.8.1
log
@SVN rev 232438 on 2012-03-03 06:15:13Z by kensmith

Copy stable/8 to releng/8.3 as part of 8.3-RELEASE release cycle.

Approved by:	re (implicit)
@
text
@@


1.33.2.1.8.2
log
@Switch importer
@
text
@d19 1
a19 1
# $FreeBSD: releng/8.3/sys/arm/conf/AVILA 195742 2009-07-17 18:35:45Z rpaulo $
@


1.33.2.1.6.1
log
@SVN rev 216617 on 2010-12-21 17:09:25Z by kensmith

Copy stable/8 to releng/8.2 in preparation for FreeBSD-8.2 release.

Approved by:	re (implicit)
@
text
@@


1.33.2.1.4.1
log
@SVN rev 209145 on 2010-06-14 02:09:06Z by kensmith

Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.

Approved by:	re (implicit)
@
text
@@


1.33.2.1.2.1
log
@SVN rev 198460 on 2009-10-25 01:10:29Z by kensmith

Copy stable/8 to releng/8.0 as part of 8.0-RELEASE release procedure.

Approved by:	re (implicit)
@
text
@@


1.32
log
@SVN rev 192901 on 2009-05-27 16:16:56Z by thompsa

Delete the old USB stack. The new stack has settled in and has all the
drivers/functionality and then some.
@
text
@d108 1
@


1.31
log
@SVN rev 191954 on 2009-05-10 00:00:25Z by kuriyama

- Use "device\t" and "options \t" for consistency.
@
text
@d135 1
a135 2
makeoptions	WITH_LEGACY
device		ousb
d137 3
a139 3
device		oohci
device		oehci
device		oumass
d143 2
a144 2
#device		oural
#device		ozyd
@


1.30
log
@SVN rev 190580 on 2009-03-30 21:54:39Z by sam

revert unintended change
@
text
@d102 1
a102 1
device          random          # Entropy device
d106 2
a107 2
options		IEEE80211_DEBUG
options		IEEE80211_SUPPORT_TDMA
d115 2
a116 2
options		ATH_DIAGAPI
#options		ATH_TX99_DIAG
d119 2
a120 2
#options		AH_DEBUG
#options		AH_ASSERT
d132 1
a132 1
options		AH_SUPPORT_AR5416
@


1.29
log
@SVN rev 190579 on 2009-03-30 21:53:27Z by sam

Hoist 802.11 encapsulation up into net80211:
o call ieee80211_encap in ieee80211_start so frames passed down to drivers
  are already encapsulated
o remove ieee80211_encap calls in drivers
o fixup wi so it recreates the 802.3 head it requires from the 802.11
  header contents
o move fast-frame aggregation from ath to net80211 (conditional on
  IEEE80211_SUPPORT_SUPERG):
  - aggregation is now done in ieee80211_start; it is enabled when the
    packets/sec exceeds ieee80211_ffppsmin (net.wlan.ffppsmin) and frames
    are held on a staging queue according to ieee80211_ffagemax
    (net.wlan.ffagemax) to wait for a frame to combine with
  - drivers must call back to age/flush the staging queue (ath does this
    on tx done, at swba, and on rx according to the state of the tx queues
    and/or the contents of the staging queue)
  - remove fast-frame-related data structures from ath
  - add ieee80211_ff_node_init and ieee80211_ff_node_cleanup to handle
    per-node fast-frames state (we reuse 11n tx ampdu state)
o change ieee80211_encap calling convention to include an explicit vap
  so frames coming through a WDS vap are recognized w/o setting M_WDS

With these changes any device able to tx/rx 3Kbyte+ frames can use fast-frames.

Reviewed by:	thompsa, rpaulo, avatar, imp, sephe
@
text
@a53 1
options		NFS_LEGACYRPC
@


1.28
log
@SVN rev 190571 on 2009-03-30 19:23:49Z by sam

Remove ATH_SUPPORT_TDMA and use IEEE80211_SUPPORT_TDMA instead.  It
doesn't make much sense to configure driver support w/o net80211.
Note this means ath now depends on opt_wlan.h.
@
text
@d54 1
@


1.27
log
@SVN rev 189609 on 2009-03-09 23:25:34Z by sam

add cfid and geom_redboot
@
text
@a113 1
options		ATH_SUPPORT_TDMA
@


1.26
log
@SVN rev 189460 on 2009-03-06 23:27:47Z by sam

enable tdma support by default; many people using these boards
are using them to setup tdma p2p links
@
text
@d71 2
@


1.25
log
@SVN rev 189459 on 2009-03-06 23:26:50Z by sam

legacy USB is required on these platforms at the moment
@
text
@d105 1
d112 1
@


1.24
log
@SVN rev 188944 on 2009-02-23 18:34:56Z by thompsa

Change over the usb kernel options to the new stack (retaining existing
naming). The old usb stack can be compiled in my prefixing the name with 'o'.
@
text
@d132 2
a133 1
device		usb
d135 5
a139 5
device		ohci
device		ehci
#device		umass
#device		scbus		# SCSI bus (required for SCSI)
#device		da		# Direct Access (disks)
d141 2
a142 2
#device		ural
#device		zyd
@


1.23
log
@SVN rev 188744 on 2009-02-18 01:37:57Z by sam

use mii instead of miibus so we don't drag in all phy support
(we only need ukphy which is brought in by mii)

MFC after:	1 week
@
text
@a135 1
device		ugen
@


1.22
log
@SVN rev 188088 on 2009-02-03 19:16:04Z by sam

Add support for the StrataFlash on 2348 boards:
o add bus shim for cfi driver
o add static mapping for CS0 (we map all 16M as the cfi driver doesn't
  support demand mapping)

Note this needs some tweaking to work for 2358 boards which is why the
CAMBRIA config is not touched.
@
text
@d91 1
a91 1
device		miibus		# NB: required by npe
@


1.21
log
@SVN rev 186523 on 2008-12-27 17:22:17Z by bz

Removed duplicate
  makeoptions    MODULES_OVERRIDE=""
@
text
@d69 3
a77 1
device		ixpwdog		# watchdog timer
@


1.20
log
@SVN rev 186352 on 2008-12-20 03:26:09Z by sam

Merge support for Gateworks Cambria boards:
o add support for IXP435 cpu's (e.g. 64 irq's)
o add support for Cambria-specific devices: npe, led's (front panel and
  octal latch), ehci, mcu, ide cf
o redo memory mapping for xscale/ixp4xx boards: previously memory
  was assumed aliased to 0x10000000 but this appears to be true only
  for ixp425 systems and breaks operation on others; rework so memory
  is assumed to start at 0
o rework NPE configuration support to use NPE id's instead of port #'s;
  these changes also rename the associated MAC's to follow the NPE's
  they are attached to
o update npe firmware to latest rev (same license) and update default fw
  imageid's to match; in particular this adds NPE-A and crypto support
o re-style NPE fw handling code and add a console msg identifying the
  attributes of the loaded fw
o fix numerous problems with handling failures during npe setup
o fix npe rx q setup; need to spin waiting for mailbox responses during
  early boot stages as qmgr interrupts are not delivered; this fixes
  the problem where all 8 traffic classifications were not tied to the
  rx q (and eliminates the console msg "remember to fix rx q setup")
o add DELAY to npe MII wait logic for IXP435
o strip down builtin phys->virt address translation table in resource
  handling to just those resources that require it and add a console msg
  to alert people when this (kludge) table needs to be extended
o purge a bunch of dead netbsd-ism's
o cleanup avila led driver
o add Cambria support to boot2 and rework code for better multi-board support

Notes:
  1. NPE-A doesn't work and causes NPE-C to stop working; it is disabled
     in the hints
  2. USB isn't working yet; controller communicates ok but device
     discovery fails
  3. Cambria support must be configured separately from IXP425 boards;
     multi-board support is TBD

Sponsored by:	Hobnob, Gateworks (board donation)
Reviewed by:	imp
@
text
@a33 1
makeoptions	MODULES_OVERRIDE=""
@


1.19
log
@SVN rev 185522 on 2008-12-01 16:53:01Z by sam

Switch to ath hal source code. Note this removes the ath_hal
module; the ath module now brings in the hal support.  Kernel
config files are almost backwards compatible; supplying

device ath_hal

gives you the same chip support that the binary hal did but you
must also include

options AH_SUPPORT_AR5416

to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.
@
text
@d23 2
a24 7
options 	PHYSADDR=0x10000000
options 	KERNPHYSADDR=0x10200000	
options 	KERNVIRTADDR=0xc0200000		# Used in ldscript.arm
options 	FLASHADDR=0x50000000
options 	LOADERRAMADDR=0x00000000
options 	STARTUP_PAGETABLE_ADDR=0x10000000

d26 2
d34 1
d43 2
a44 2
#options 	INVARIANTS		#Enable calls of extra sanity checking
#options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
a50 1
options 	INET6			#IPv6 communications protocols
a52 2
options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
a53 2
options 	NFSSERVER		#Network Filesystem Server
options 	NFSLOCKD		#Network Lock Manager
a54 11
#options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
#options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
a90 1
device		rl		# RealTek 8129/8139
a97 1
options 	XSCALE_CACHE_READ_WRITE_ALLOCATE
a100 2
#options 	ARM_USE_SMALL_ALLOC

d103 1
d108 1
d110 3
a112 2
device		ath_hal		# Atheros HAL (Hardware Access Layer)
options		AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
a113 1
options 	ATH_DEBUG
d115 15
a129 3
#device		crypto
#device		cryptodev
#device		hifn		# NB: Soekris minipci card known to work
d132 1
a132 1
options 	USB_DEBUG
d136 7
a142 7
device		umass
device		scbus		# SCSI bus (required for SCSI)
device		da		# Direct Access (disks)

device		ural
device		zyd
device		wlan_amrr
@


1.18
log
@SVN rev 185478 on 2008-11-30 17:53:19Z by sam

enable use of modules but disable them by adding MODULES_OVERRIDE=""
in each config file until we can sort out issues in the modules tree

Reviewed by:	imp
MFC after:	1 month
@
text
@d131 1
@


1.17
log
@SVN rev 184193 on 2008-10-23 01:51:55Z by marcel

Add arm/conf/DEFAULTS and populate it with:
        machine arm
        device  mem
        options GEOM_BSD
        options GEOM_MBR

Remove the first two from all kernel configuration files and
change geom_bsd and geom_mbr from standard to optional.
@
text
@d33 1
@


1.16
log
@SVN rev 181219 on 2008-08-02 22:53:43Z by imp

Minor style nit.
@
text
@a20 1
machine		arm
a81 1
device		mem			# Memory and kernel memory devices
@


1.15
log
@SVN rev 181157 on 2008-08-02 07:20:30Z by imp

ixp425 parts aren't multicore, so remove the SMP option.  They also
don't support the ioapic either, so remove that option too.  These
were commented out, but could never be enabled, unlike the other
options in the file that are commented out.
@
text
@d29 1
a30 1
options STARTUP_PAGETABLE_ADDR=0x10000000
@


1.14
log
@SVN rev 181156 on 2008-08-02 07:18:12Z by imp

Conform to the options<space><tab> convention everywhere in this file.
This is just a white space change, no functional change.
@
text
@a117 3
# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O
@


1.13
log
@Make genclock standard on all platforms.

Thanks to: grehan & marcel for platform support on ia64 and ppc.
@
text
@d25 4
a28 4
options		KERNPHYSADDR=0x10200000	
options		KERNVIRTADDR=0xc0200000		# Used in ldscript.arm
options		FLASHADDR=0x50000000
options		LOADERRAMADDR=0x00000000
d37 3
a39 3
#options		HZ=1000
options		HZ=100
options		DEVICE_POLLING
d42 2
a43 2
options		KDB
#options		GDB
d49 1
a49 1
#options		DIAGNOSTIC
d73 9
a81 9
options		BOOTP
options		BOOTP_NFSROOT
options		BOOTP_NFSV3
options		BOOTP_WIRED_TO=npe0
#options		BOOTP_WIRED_TO=ath0
#options		BOOTP_WIRED_TO=rl0
options		BOOTP_COMPAT
#options		PREEMPTION
#options		VERBOSE_SYSINIT
d121 1
a121 1
options		XSCALE_CACHE_READ_WRITE_ALLOCATE
d125 1
a125 1
#options		ARM_USE_SMALL_ALLOC
d136 1
a136 1
options		ATH_DEBUG
@


1.12
log
@Multi-bss (aka vap) support for 802.11 devices.

Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
@
text
@a82 1
device		genclock
@


1.11
log
@Add kernel module support for nfslockd and krpc. Use the module system
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.
@
text
@a132 2
device		wlan_scan_sta
device		wlan_scan_ap
@


1.10
log
@add usb devices and more wlan stuff now that usb is functional

MFC after:	1 month
@
text
@d60 1
@


1.9
log
@Remove kernel support for M:N threading.

While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential.  Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
@
text
@d94 1
a94 1
device		ixpiic
d129 6
a134 3
#device		wlan_wep	# 802.11 WEP support
#device		wlan_ccmp	# 802.11 CCMP support
#device		wlan_tkip	# 802.11 TKIP support
d144 12
a155 9
#device		usb
#options 	USB_DEBUG
#device		uhci
#device		ohci
#device		ehci
#device		ugen
#device		umass
#device		scbus		# SCSI bus (required for SCSI)
#device		da		# Direct Access (disks)
@


1.8
log
@Add rl(4) support
@
text
@a51 1
options		KSE
@


1.7
log
@Cleanup : make nexus standard, as it is mandatory anyway.
Garbage-collect unused nexus_io.c and nexus_io_asm.S

Submitted by:	Rafal Jaworowski <raj AT semihalf DOT com>
@
text
@d78 1
d111 1
@


1.6
log
@Ok I hope I got it right this time.
After discussion with Sam, switch back to use firmware(9) instead of
having the firmware in hex format.
Put the binary firmware uuencoded into sys/contrib/dev/npe, and slap a
LICENSE file, as found on the Intel website.

Approved by:	re (blanket), mux (mentor)
MFC After:	1 week
@
text
@a82 1
device		nexus
@


1.6.2.1
log
@MFC: Kernel mode Network Lock Manager.
@
text
@a60 1
options 	NFSLOCKD		#Network Lock Manager
@


1.6.2.2
log
@SVN rev 187108 on 2009-01-12 19:16:00Z by sam

MFC r185478: enable use of modules but disable them by adding MODULES_OVERRIDE=""
@
text
@a33 1
makeoptions	MODULES_OVERRIDE=""
@


1.6.2.3
log
@SVN rev 189720 on 2009-03-12 03:09:11Z by bms

Merge the open source Atheros HAL from HEAD to STABLE.

This adds support for the AH_SUPPORT_AR5416 kernel
configuration option, and removes the ath_rate*
and ath_hal modules. Their kernel options are not
however removed -- please see UPDATING.

Tested on an IBM/Lenovo T43 and ASUS EeePC 701 in both
STA and HostAP modes.

Submitted by:	sam
@
text
@a135 1
options		AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
@


1.6.2.4
log
@Switch importer
@
text
@d19 1
a19 1
# $FreeBSD: stable/7/sys/arm/conf/AVILA 189720 2009-03-12 03:09:11Z bms $
@


1.6.2.3.6.1
log
@SVN rev 216618 on 2010-12-21 17:10:29Z by kensmith

Copy stable/7 to releng/7.4 in preparation for FreeBSD-7.4 release.

Approved by:	re (implicit)
@
text
@@


1.6.2.3.6.2
log
@Switch importer
@
text
@d19 1
a19 1
# $FreeBSD: releng/7.4/sys/arm/conf/AVILA 189720 2009-03-12 03:09:11Z bms $
@


1.6.2.3.4.1
log
@SVN rev 203736 on 2010-02-10 00:26:20Z by kensmith

Copy stable/7 to releng/7.3 as part of the 7.3-RELEASE process.

Approved by:	re (implicit)
@
text
@@


1.6.2.3.2.1
log
@SVN rev 191087 on 2009-04-15 03:14:26Z by kensmith

Create releng/7.2 from stable/7 in preparation for 7.2-RELEASE.

Approved by:	re (implicit)
@
text
@@


1.6.2.1.2.1
log
@SVN rev 185281 on 2008-11-25 02:59:29Z by kensmith

Create releng/7.1 in preparation for moving into RC phase of 7.1 release
cycle.

Approved by:	re (implicit)
@
text
@@


1.5
log
@Now that Intel changed the license for the NPE firmware, import it directly
hexed into our tree, instead of requiring the user to download it.

Approved by:	re (blanket)
MFC after:	1 week
@
text
@d107 2
@


1.4
log
@o add hints for avila boards; brings back i2c devices lost when iicbus
  started using hints instead of wired down device enumeration
o add usb commented out; will enable when support works

MFC after:	1 month
@
text
@a106 2
device		npe_fw		# NPE firmware
device		firmware	# firmware support for npe_fw
@


1.3
log
@Define FLASHADDR and LOADERRAMADDR for the Avila, so that we can boot a
kernel from the onboard flash.
@
text
@d33 1
a33 1
#hints		"GENERIC.hints"		#Default places to look for devices.
d140 10
@


1.3.2.1
log
@MFC support for the IXP425.
MFC work largely done by:	sam
@
text
@d27 2
d52 1
a76 1
options		ARM32_NEW_VM_LAYOUT
d132 4
a135 5
#device		ath		# Atheros pci/cardbus NIC's
#device		ath_hal		# Atheros HAL (Hardware Access Layer)
#device		ath_rate_sample	# SampleRate tx rate control for ath
#options		ATH_DEBUG
#options		ATH_DIAGAPI
a139 10

device		usb
options 	USB_DEBUG
device		uhci
device		ohci
device		ehci
device		ugen
device		umass
device		scbus		# SCSI bus (required for SCSI)
device		da		# Direct Access (disks)
@


1.3.2.2
log
@MFC:
Teach the kernel and the ELF trampoline how to boot from onboard flash.
@
text
@a26 2
options		FLASHADDR=0x50000000
options		LOADERRAMADDR=0x00000000
@


1.3.2.3
log
@MFC: kernel-mode NFS lock manager.
@
text
@a59 1
options 	NFSLOCKD		#Network Lock Manager
@


1.3.2.4
log
@Switch importer
@
text
@d19 1
a19 1
# $FreeBSD: stable/6/sys/arm/conf/AVILA 178459 2008-04-24 10:46:25Z dfr $
@


1.3.2.3.2.1
log
@SVN rev 183531 on 2008-10-02 02:57:24Z by kensmith

Create releng/6.4 from stable/6 in preparation for 6.4-RC1.

Approved by:	re (implicit)
@
text
@@


1.2
log
@Bring in status led support for /dev/led/gpioled on Avila.

Approved by: cognet
@
text
@d27 2
@


1.1
log
@config for Gateworks Avila board booting with NFS-mounted root on npe0

Reviewed by:	cognet, imp
MFC after:	1 month
@
text
@d98 2
@

