head	1.22;
access;
symbols
	RELENG_8_4:1.22.0.2
	RELENG_9_1_0_RELEASE:1.18.2.1.4.2
	RELENG_9_1:1.18.2.1.0.4
	RELENG_9_1_BP:1.18.2.1
	RELENG_8_3_0_RELEASE:1.16.2.3.2.1
	RELENG_8_3:1.16.2.3.0.2
	RELENG_8_3_BP:1.16.2.3
	RELENG_9_0_0_RELEASE:1.18.2.1.2.1
	RELENG_9_0:1.18.2.1.0.2
	RELENG_9_0_BP:1.18.2.1
	RELENG_9:1.18.0.2
	RELENG_9_BP:1.18
	RELENG_7_4_0_RELEASE:1.10.10.4.4.1
	RELENG_8_2_0_RELEASE:1.16.2.2.6.1
	RELENG_7_4:1.10.10.4.0.4
	RELENG_7_4_BP:1.10.10.4
	RELENG_8_2:1.16.2.2.0.6
	RELENG_8_2_BP:1.16.2.2
	RELENG_8_1_0_RELEASE:1.16.2.2.4.1
	RELENG_8_1:1.16.2.2.0.4
	RELENG_8_1_BP:1.16.2.2
	RELENG_7_3_0_RELEASE:1.10.10.4.2.1
	RELENG_7_3:1.10.10.4.0.2
	RELENG_7_3_BP:1.10.10.4
	RELENG_8_0_0_RELEASE:1.16.2.2.2.1
	RELENG_8_0:1.16.2.2.0.2
	RELENG_8_0_BP:1.16.2.2
	RELENG_8:1.16.0.2
	RELENG_8_BP:1.16
	RELENG_7_2_0_RELEASE:1.10.10.3.2.1
	RELENG_7_2:1.10.10.3.0.2
	RELENG_7_2_BP:1.10.10.3
	RELENG_7_1_0_RELEASE:1.10.10.1.2.1
	RELENG_6_4_0_RELEASE:1.10.2.1.2.1
	RELENG_7_1:1.10.10.1.0.2
	RELENG_7_1_BP:1.10.10.1
	RELENG_6_4:1.10.2.1.0.2
	RELENG_6_4_BP:1.10.2.1
	RELENG_7_0_0_RELEASE:1.10.14.1
	RELENG_6_3_0_RELEASE:1.10
	RELENG_7_0:1.10.0.14
	RELENG_7_0_BP:1.10
	RELENG_6_3:1.10.0.12
	RELENG_6_3_BP:1.10
	RELENG_7:1.10.0.10
	RELENG_7_BP:1.10
	RELENG_6_2_0_RELEASE:1.10
	RELENG_6_2:1.10.0.8
	RELENG_6_2_BP:1.10
	RELENG_5_5_0_RELEASE:1.7.2.2
	RELENG_5_5:1.7.2.2.0.2
	RELENG_5_5_BP:1.7.2.2
	RELENG_6_1_0_RELEASE:1.10
	RELENG_6_1:1.10.0.6
	RELENG_6_1_BP:1.10
	RELENG_6_0_0_RELEASE:1.10
	RELENG_6_0:1.10.0.4
	RELENG_6_0_BP:1.10
	RELENG_6:1.10.0.2
	RELENG_6_BP:1.10
	RELENG_5_4_0_RELEASE:1.7.2.1
	RELENG_5_4:1.7.2.1.0.4
	RELENG_5_4_BP:1.7.2.1
	RELENG_5_3_0_RELEASE:1.7.2.1
	RELENG_5_3:1.7.2.1.0.2
	RELENG_5_3_BP:1.7.2.1
	RELENG_5:1.7.0.2
	RELENG_5_BP:1.7
	RELENG_5_2_1_RELEASE:1.3
	RELENG_5_2_0_RELEASE:1.3
	RELENG_5_2:1.3.0.6
	RELENG_5_2_BP:1.3
	RELENG_5_1_0_RELEASE:1.3
	RELENG_5_1:1.3.0.4
	RELENG_5_1_BP:1.3
	RELENG_5_0_0_RELEASE:1.3
	RELENG_5_0:1.3.0.2
	RELENG_5_0_BP:1.3
	head_20020621:1.1.1.2
	head_20010615:1.1.1.1
	NETBSD:1.1.1;
locks; strict;
comment	@# @;


1.22
date	2013.03.19.06.09.18;	author svnexp;	state Exp;
branches
	1.22.2.1;
next	1.21;

1.21
date	2013.03.19.06.08.36;	author svnexp;	state Exp;
branches;
next	1.20;

1.20
date	2012.12.14.15.15.28;	author svnexp;	state Exp;
branches;
next	1.19;

1.19
date	2012.11.17.01.49.05;	author svnexp;	state Exp;
branches;
next	1.18;

1.18
date	2010.05.19.19.03.19;	author dougb;	state Exp;
branches
	1.18.2.1;
next	1.17;

1.17
date	2009.10.10.22.17.03;	author dougb;	state Exp;
branches;
next	1.16;

1.16
date	2008.08.29.20.30.30;	author jhb;	state Exp;
branches
	1.16.2.1;
next	1.15;

1.15
date	2008.07.06.08.31.29;	author mtm;	state Exp;
branches;
next	1.14;

1.14
date	2008.07.06.07.51.29;	author mtm;	state Exp;
branches;
next	1.13;

1.13
date	2008.06.23.20.54.32;	author mtm;	state Exp;
branches;
next	1.12;

1.12
date	2008.06.23.04.46.54;	author mtm;	state Exp;
branches;
next	1.11;

1.11
date	2007.12.08.07.20.22;	author dougb;	state Exp;
branches;
next	1.10;

1.10
date	2004.10.24.13.04.09;	author des;	state Exp;
branches
	1.10.2.1
	1.10.10.1
	1.10.14.1;
next	1.9;

1.9
date	2004.10.18.23.40.13;	author thomas;	state Exp;
branches;
next	1.8;

1.8
date	2004.10.07.13.55.26;	author mtm;	state Exp;
branches;
next	1.7;

1.7
date	2004.03.18.15.18.20;	author davidc;	state Exp;
branches
	1.7.2.1;
next	1.6;

1.6
date	2004.03.08.12.25.05;	author pjd;	state Exp;
branches;
next	1.5;

1.5
date	2004.01.17.10.59.43;	author mtm;	state Exp;
branches;
next	1.4;

1.4
date	2004.01.17.10.16.38;	author mtm;	state Exp;
branches;
next	1.3;

1.3
date	2002.09.06.16.18.05;	author gordon;	state Exp;
branches;
next	1.2;

1.2
date	2002.06.13.22.14.36;	author gordon;	state Exp;
branches;
next	1.1;

1.1
date	2001.06.16.07.16.14;	author obrien;	state Exp;
branches
	1.1.1.1;
next	;

1.22.2.1
date	2013.03.19.06.09.18;	author svnexp;	state dead;
branches;
next	1.22.2.2;

1.22.2.2
date	2013.03.28.13.02.44;	author svnexp;	state Exp;
branches;
next	;

1.18.2.1
date	2011.09.23.00.51.37;	author kensmith;	state Exp;
branches
	1.18.2.1.2.1
	1.18.2.1.4.1;
next	1.18.2.2;

1.18.2.2
date	2012.11.17.11.36.11;	author svnexp;	state Exp;
branches;
next	;

1.18.2.1.2.1
date	2011.11.11.04.20.22;	author kensmith;	state Exp;
branches;
next	1.18.2.1.2.2;

1.18.2.1.2.2
date	2012.11.17.08.36.11;	author svnexp;	state Exp;
branches;
next	;

1.18.2.1.4.1
date	2012.08.05.23.54.33;	author kensmith;	state Exp;
branches;
next	1.18.2.1.4.2;

1.18.2.1.4.2
date	2012.11.17.08.47.01;	author svnexp;	state Exp;
branches;
next	;

1.16.2.1
date	2009.08.03.08.13.06;	author kensmith;	state Exp;
branches;
next	1.16.2.2;

1.16.2.2
date	2009.10.16.00.17.09;	author dougb;	state Exp;
branches
	1.16.2.2.2.1
	1.16.2.2.4.1
	1.16.2.2.6.1;
next	1.16.2.3;

1.16.2.3
date	2012.02.10.10.18.30;	author dougb;	state Exp;
branches
	1.16.2.3.2.1;
next	1.16.2.4;

1.16.2.4
date	2012.11.17.10.35.57;	author svnexp;	state Exp;
branches;
next	;

1.16.2.2.2.1
date	2009.10.25.01.10.29;	author kensmith;	state Exp;
branches;
next	;

1.16.2.2.4.1
date	2010.06.14.02.09.06;	author kensmith;	state Exp;
branches;
next	;

1.16.2.2.6.1
date	2010.12.21.17.09.25;	author kensmith;	state Exp;
branches;
next	;

1.16.2.3.2.1
date	2012.03.03.06.15.13;	author kensmith;	state Exp;
branches;
next	1.16.2.3.2.2;

1.16.2.3.2.2
date	2012.11.17.08.24.38;	author svnexp;	state Exp;
branches;
next	;

1.10.2.1
date	2008.01.28.08.22.33;	author dougb;	state Exp;
branches
	1.10.2.1.2.1;
next	1.10.2.2;

1.10.2.2
date	2012.11.17.07.39.09;	author svnexp;	state Exp;
branches;
next	;

1.10.2.1.2.1
date	2008.10.02.02.57.24;	author kensmith;	state Exp;
branches;
next	;

1.10.10.1
date	2008.01.28.07.55.44;	author dougb;	state Exp;
branches
	1.10.10.1.2.1;
next	1.10.10.2;

1.10.10.2
date	2009.03.21.21.12.16;	author rodrigc;	state Exp;
branches;
next	1.10.10.3;

1.10.10.3
date	2009.03.21.21.16.05;	author rodrigc;	state Exp;
branches
	1.10.10.3.2.1;
next	1.10.10.4;

1.10.10.4
date	2009.09.05.18.44.36;	author rodrigc;	state Exp;
branches
	1.10.10.4.2.1
	1.10.10.4.4.1;
next	1.10.10.5;

1.10.10.5
date	2012.11.17.08.01.23;	author svnexp;	state Exp;
branches;
next	;

1.10.10.1.2.1
date	2008.11.25.02.59.29;	author kensmith;	state Exp;
branches;
next	;

1.10.10.3.2.1
date	2009.04.15.03.14.26;	author kensmith;	state Exp;
branches;
next	;

1.10.10.4.2.1
date	2010.02.10.00.26.20;	author kensmith;	state Exp;
branches;
next	;

1.10.10.4.4.1
date	2010.12.21.17.10.29;	author kensmith;	state Exp;
branches;
next	1.10.10.4.4.2;

1.10.10.4.4.2
date	2012.11.17.08.16.37;	author svnexp;	state Exp;
branches;
next	;

1.10.14.1
date	2008.01.28.07.58.31;	author dougb;	state Exp;
branches;
next	;

1.7.2.1
date	2004.10.10.09.50.54;	author mtm;	state Exp;
branches;
next	1.7.2.2;

1.7.2.2
date	2005.04.30.16.21.04;	author des;	state Exp;
branches;
next	;

1.1.1.1
date	2001.06.16.07.16.14;	author obrien;	state Exp;
branches;
next	1.1.1.2;

1.1.1.2
date	2002.06.21.19.07.21;	author obrien;	state Exp;
branches;
next	;


desc
@@


1.22
log
@## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/248488
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
@
text
@#!/bin/sh
#
# $FreeBSD: head/etc/rc.d/savecore 248488 2013-03-19 05:08:25Z cperciva $
#

# PROVIDE: savecore
# REQUIRE: dumpon ddb syslogd
# KEYWORD: nojail

. /etc/rc.subr

name="savecore"
start_cmd="savecore_start"
start_precmd="savecore_prestart"
stop_cmd=":"

savecore_prestart()
{
	# Quit if we have no dump device
	case ${dumpdev} in
	[Nn][Oo] | '')
		debug 'No dump device. Quitting.'
		return 1
		;;
	[Aa][Uu][Tt][Oo])
		if [ ! -L /dev/dumpdev ]; then
			return 1
		fi
		dumpdev=`/bin/realpath /dev/dumpdev`
		;;
	esac

	# If there is no crash directory set it now
	case ${dumpdir} in
	'')
		dumpdir='/var/crash'
		;;
	[Nn][Oo])
		dumpdir='NO'
		;;
	esac

	if [ ! -c "${dumpdev}" ]; then
		warn "Dump device does not exist.  Savecore not run."
		return 1
	fi

	if [ ! -d "${dumpdir}" ]; then
		warn "Dump directory does not exist.  Savecore not run."
		return 1
	fi
	return 0
}

savecore_start()
{
	local dev

	case "${dumpdev}" in
	[Aa][Uu][Tt][Oo])
		dev=
		;;
	*)
		dev="${dumpdev}"
		;;
	esac

	if savecore -C "${dev}" >/dev/null; then
		savecore ${savecore_flags} ${dumpdir} ${dumpdev}
		if checkyesno crashinfo_enable; then
			${crashinfo_program} -d ${dumpdir}
		fi
	else
		check_startmsgs && echo 'No core dumps found.'
	fi
}

load_rc_config $name
run_rc_command "$1"
@


1.22.2.1
log
@file savecore was added on branch RELENG_8_4 on 2013-03-28 13:02:44 +0000
@
text
@d1 79
@


1.22.2.2
log
@## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/248810
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
@
text
@a0 76
#!/bin/sh
#
# $FreeBSD: releng/8.4/etc/rc.d/savecore 231372 2012-02-10 10:18:30Z dougb $
#

# PROVIDE: savecore
# REQUIRE: dumpon ddb syslogd
# KEYWORD: nojail

. /etc/rc.subr

name="savecore"
start_cmd="savecore_start"
start_precmd="savecore_prestart"
stop_cmd=":"

savecore_prestart()
{
	# Quit if we have no dump device
	case ${dumpdev} in
	[Nn][Oo] | '')
		debug 'No dump device. Quitting.'
		return 1
		;;
	[Aa][Uu][Tt][Oo])
		dumpdev=`/bin/realpath /dev/dumpdev`
		;;
	esac

	# If there is no crash directory set it now
	case ${dumpdir} in
	'')
		dumpdir='/var/crash'
		;;
	[Nn][Oo])
		dumpdir='NO'
		;;
	esac

	if [ ! -c "${dumpdev}" ]; then
		warn "Dump device does not exist.  Savecore not run."
		return 1
	fi

	if [ ! -d "${dumpdir}" ]; then
		warn "Dump directory does not exist.  Savecore not run."
		return 1
	fi
	return 0
}

savecore_start()
{
	local dev

	case "${dumpdev}" in
	[Aa][Uu][Tt][Oo])
		dev=
		;;
	*)
		dev="${dumpdev}"
		;;
	esac

	if savecore -C "${dumpdir}" "${dev}" >/dev/null; then
		savecore ${savecore_flags} ${dumpdir} ${dumpdev}
		if checkyesno crashinfo_enable; then
			${crashinfo_program} -d ${dumpdir}
		fi
	else
		check_startmsgs && echo 'No core dumps found.'
	fi
}

load_rc_config $name
run_rc_command "$1"
@


1.21
log
@## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/248487
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
@
text
@d3 1
a3 1
# $FreeBSD: head/etc/rc.d/savecore 248487 2013-03-19 04:42:04Z cperciva $
d26 1
a26 1
		if [ ! -L /bin/realpath ]; then
@


1.20
log
@## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/244218
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
@
text
@d3 1
a3 1
# $FreeBSD: head/etc/rc.d/savecore 244218 2012-12-14 15:12:08Z pjd $
d26 3
@


1.19
log
@Switching exporter and resync
@
text
@d3 1
a3 1
# $FreeBSD: head/etc/rc.d/savecore 208307 2010-05-19 19:03:19Z dougb $
d65 1
a65 1
	if savecore -C "${dumpdir}" "${dev}" >/dev/null; then
@


1.18
log
@SVN rev 208307 on 2010-05-19 19:03:19Z by dougb

This change does the following for the scripts that run up through
FILESYSTEMS (the default early_late_divider):
1. Move sysctl to run first
2. Move as many BEFOREs to REQUIREs as possible.
3. Minor effect, move hostid_save from right before mdconfig to right
   after.

A lot of the early scripts make use of sysctl one way or another so
running this first makes a lot of sense given that system-critical
values are often placed in sysctl.conf.

My original purpose for working on this was that while doing some
debugging on other stuff I noticed that the order of execution was
different in the first pass through the early scripts and the second.
In practice that doesn't matter because the scripts are not executed the
second time. However this _can_ result in problems if the difference in
the rcorder moves a script from the late section to the early section in
the second pass (which would mean the script would not get executed).
So, I wanted to make the order of execution of the scripts in the early
section more deterministic.

In the course of debugging the ordering problems I noticed that moving
the BEFOREs to REQUIREs prevented the changes in order from the first
pass to the second pass without having to make any substantial changes.
(Of course it's no secret that I think BEFORE should be avoided as much
as possible, but this is a good example of why.)

Reviewed by:	silence on freebsd-rc@@
MFC after:	8.1-RELEASE
@
text
@d3 1
a3 1
# $FreeBSD$
@


1.18.2.1
log
@SVN rev 225736 on 2011-09-23 00:51:37Z by kensmith

Copy head to stable/9 as part of 9.0-RELEASE release cycle.

Approved by:	re (implicit)
@
text
@@


1.18.2.2
log
@## SVN ##
## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/ 242902
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ## r242902 | dteske | 2012-11-11 23:29:45 +0000 (Sun, 11 Nov 2012) | 10 lines
## SVN ##
## SVN ## Fix a regression introduced by SVN r211417 that saw the breakage of a feature
## SVN ## documented in usr.sbin/sysinstall/help/shortcuts.hlp (reproduced below):
## SVN ##
## SVN ## If /usr/sbin/sysinstall is linked to another filename, say
## SVN ## `/usr/local/bin/configPackages', then the basename will be used
## SVN ## as an implicit command name.
## SVN ##
## SVN ## Reviewed by:	adrian (co-mentor)
## SVN ## Approved by:	adrian (co-mentor)
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ##
@
text
@d3 1
a3 1
# $FreeBSD: stable/9/etc/rc.d/savecore 208307 2010-05-19 19:03:19Z dougb $
@


1.18.2.1.4.1
log
@SVN rev 239080 on 2012-08-05 23:54:33Z by kensmith

Copy stable/9 to releng/9.1 as part of the 9.1-RELEASE release process.

Approved by:	re (implicit)
@
text
@@


1.18.2.1.4.2
log
@Switch importer
@
text
@d3 1
a3 1
# $FreeBSD: releng/9.1/etc/rc.d/savecore 208307 2010-05-19 19:03:19Z dougb $
@


1.18.2.1.2.1
log
@SVN rev 227445 on 2011-11-11 04:20:22Z by kensmith

Copy stable/9 to releng/9.0 as part of the FreeBSD 9.0-RELEASE release
cycle.

Approved by:	re (implicit)
@
text
@@


1.18.2.1.2.2
log
@Switch importer
@
text
@d3 1
a3 1
# $FreeBSD: releng/9.0/etc/rc.d/savecore 208307 2010-05-19 19:03:19Z dougb $
@


1.17
log
@SVN rev 197947 on 2009-10-10 22:17:03Z by dougb

In regards to the "Starting foo:" type messages at boot time, create and
employ a more generic solution, and use it in the individual rc.d scripts
that also have an $rc_quiet test:

1. Add check_startmsgs() to rc.subr.
2. In the rc.d scripts that use rc_quiet (and rc.subr) substitute
variations of [ -z "$rc_quiet" ] with check_startmsgs
3. In savecore add a trailing '.' to the end of the message to make it
more consistent with other scripts.
4. In newsyslog remove a : before the terminal '.' since we do not expect
there to be anything printed out in between to make it more consistent.
5. In the following scripts change "quotes" to 'quotes' where no variables
exist in the message: savecore pf newsyslog
6. In the following scripts substitute if/then/fi for the simpler (and
more consistent) check_startmsgs &&: faith stf
7. In the following scripts separate the "Starting foo:" from the terminal
'.' to make them more consistent: moused hostname pf
8. In nfsclient move the message to its own line to avoid a style bug
9. In pf rc_quiet does not apply to the _stop method, so remove the
test there.
10. In motd add 'quotes' around the terminal '.' for consistency
@
text
@d7 1
a7 2
# REQUIRE: syslogd
# BEFORE:  SERVERS
@


1.16
log
@SVN rev 182460 on 2008-08-29 20:30:30Z by jhb

Add the ability to run /usr/sbin/crashinfo on a new core dump automatically
during boot.  Right now this is disabled by default, but it can be enabled
by setting 'crashinfo_enable=YES' in rc.conf.

MFC after:	2 weeks
@
text
@d72 1
a72 1
		[ -z "${rc_quiet}" ] && echo "No core dumps found"
@


1.16.2.1
log
@SVN rev 196045 on 2009-08-03 08:13:06Z by kensmith

Copy head to stable/8 as part of 8.0 Release cycle.

Approved by:	re (Implicit)
@
text
@@


1.16.2.2
log
@SVN rev 198164 on 2009-10-16 00:17:09Z by dougb

MFC r197947:

In regards to the "Starting foo:" type messages at boot time, create
and employ a more generic solution, and use it in the individual rc.d
scripts that also have an $rc_quiet test:

1. Add check_startmsgs() to rc.subr.
2. In the rc.d scripts that use rc_quiet (and rc.subr) substitute
variations of [ -z "$rc_quiet" ] with check_startmsgs
3. In savecore add a trailing '.' to the end of the message to make it
more consistent with other scripts.
4. In newsyslog remove a : before the terminal '.' since we do not
expect there to be anything printed out in between to make it more
consistent.
5. In the following scripts change "quotes" to 'quotes' where no
variables exist in the message: savecore pf newsyslog
6. [Does not apply in RELENG_8]
7. In the following scripts separate the "Starting foo:" from the
terminal '.' to make them more consistent: moused hostname pf
8. In nfsclient move the message to its own line to avoid a style bug
9. In pf rc_quiet does not apply to the _stop method, so remove the
test there.
10. In motd add 'quotes' around the terminal '.' for consistency

Approved by:	re (kib)
@
text
@d72 1
a72 1
		check_startmsgs && echo 'No core dumps found.'
@


1.16.2.3
log
@SVN rev 231372 on 2012-02-10 10:18:30Z by dougb

MFC r208307:

This change does the following for the scripts that run up through
FILESYSTEMS (the default early_late_divider):
1. Move sysctl to run first
2. Move as many BEFOREs to REQUIREs as possible.
3. Minor effect, move hostid_save from right before mdconfig to right
   after.

A lot of the early scripts make use of sysctl one way or another so
running this first makes a lot of sense given that system-critical
values are often placed in sysctl.conf. (More details in original log.)

In addition to the changes from this revision, tweak a few other rcorder
elements in order to minimize the differences between the order before
and after this change, mostly related to scripts still in this branch
that are no longer in HEAD.
@
text
@d7 2
a8 1
# REQUIRE: dumpon ddb syslogd
@


1.16.2.4
log
@## SVN ##
## SVN ## Exported commit - http://svnweb.freebsd.org/changeset/base/ 242909
## SVN ## CVS IS DEPRECATED: http://wiki.freebsd.org/CvsIsDeprecated
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ## r242909 | dim | 2012-11-12 07:47:19 +0000 (Mon, 12 Nov 2012) | 20 lines
## SVN ##
## SVN ## MFC r242625:
## SVN ##
## SVN ## Remove duplicate const specifiers in many drivers (I hope I got all of
## SVN ## them, please let me know if not).  Most of these are of the form:
## SVN ##
## SVN ## static const struct bzzt_type {
## SVN ##       [...list of members...]
## SVN ## } const bzzt_devs[] = {
## SVN ##       [...list of initializers...]
## SVN ## };
## SVN ##
## SVN ## The second const is unnecessary, as arrays cannot be modified anyway,
## SVN ## and if the elements are const, the whole thing is const automatically
## SVN ## (e.g. it is placed in .rodata).
## SVN ##
## SVN ## I have verified this does not change the binary output of a full kernel
## SVN ## build (except for build timestamps embedded in the object files).
## SVN ##
## SVN ## Reviewed by:	yongari, marius
## SVN ##
## SVN ## ------------------------------------------------------------------------
## SVN ##
@
text
@d3 1
a3 1
# $FreeBSD: stable/8/etc/rc.d/savecore 231372 2012-02-10 10:18:30Z dougb $
@


1.16.2.3.2.1
log
@SVN rev 232438 on 2012-03-03 06:15:13Z by kensmith

Copy stable/8 to releng/8.3 as part of 8.3-RELEASE release cycle.

Approved by:	re (implicit)
@
text
@@


1.16.2.3.2.2
log
@Switch importer
@
text
@d3 1
a3 1
# $FreeBSD: releng/8.3/etc/rc.d/savecore 231372 2012-02-10 10:18:30Z dougb $
@


1.16.2.2.6.1
log
@SVN rev 216617 on 2010-12-21 17:09:25Z by kensmith

Copy stable/8 to releng/8.2 in preparation for FreeBSD-8.2 release.

Approved by:	re (implicit)
@
text
@@


1.16.2.2.4.1
log
@SVN rev 209145 on 2010-06-14 02:09:06Z by kensmith

Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.

Approved by:	re (implicit)
@
text
@@


1.16.2.2.2.1
log
@SVN rev 198460 on 2009-10-25 01:10:29Z by kensmith

Copy stable/8 to releng/8.0 as part of 8.0-RELEASE release procedure.

Approved by:	re (implicit)
@
text
@@


1.15
log
@SVN rev 180318 on 2008-07-06 08:31:29Z by mtm

Remove the $DUMPDIR variable. It's redundant and the rest of the
script uses $dumpdir directly.
@
text
@d68 3
@


1.14
log
@SVN rev 180317 on 2008-07-06 07:51:29Z by mtm

Make checking for the availability of core dumps work in the case
that $dumpdev is not set to "AUTO".

Reported by: Paul B. Mahol <onemda@@gmail.com>
@
text
@a19 5
	#	${DUMPDIR} should be a directory or a symbolic link
	#	to the crash directory if core dumps are to be saved.
	#
	DUMPDIR="${dumpdir:-/var/crash}"

d67 1
a67 1
		savecore ${savecore_flags} ${DUMPDIR} ${dumpdev}
@


1.13
log
@SVN rev 179962 on 2008-06-23 20:54:32Z by mtm

Run savecore(8) only if there is a core dump to save. If there is
no core dump hide the message to that effect behind $rc_quiet.
@
text
@d60 12
a71 1
	if savecore -C >/dev/null; then
@


1.12
log
@SVN rev 179945 on 2008-06-23 04:46:54Z by mtm

Move a lot of diagnostic output behind $rc_quiet in scripts that
implement their own start command.
@
text
@d60 5
a64 2
	[ -z "${rc_quiet}" ] && echo "Checking for core dump on ${dumpdev}..."
	savecore ${savecore_flags} ${DUMPDIR} ${dumpdev}
@


1.11
log
@Remove $NetBSD$ CVS tags. We no longer attempt to synch our rc.d files
with theirs, so this information doesn't need to be in the live file.
Having it in our CVS history is enough.
@
text
@d60 1
a60 1
	echo "Checking for core dump on ${dumpdev}..."
@


1.10
log
@- use `realpath /dev/dumpdev` instead of just /dev/dumpdev so messages
  will show the real device name
- show different error messages for missing dump device and directory
@
text
@a2 1
# $NetBSD: savecore,v 1.5 2002/03/22 04:34:00 thorpej Exp $
@


1.10.2.1
log
@MFC the purely cosmetic changes, including removal of $NetBSD$ Ids,
a few spurious #'s, an empty REQUIRE, and a never-used KEYWORD.
@
text
@d3 1
@


1.10.2.2
log
@Switch importer
@
text
@d3 1
a3 1
# $FreeBSD: stable/6/etc/rc.d/savecore 175742 2008-01-28 08:22:33Z dougb $
@


1.10.2.1.2.1
log
@SVN rev 183531 on 2008-10-02 02:57:24Z by kensmith

Create releng/6.4 from stable/6 in preparation for 6.4-RC1.

Approved by:	re (implicit)
@
text
@@


1.10.14.1
log
@MFC the purely cosmetic changes, including removal of $NetBSD$ Ids,
a few spurious #'s, an empty REQUIRE, and a never-used KEYWORD.

Approved by:	re (kensmith)
@
text
@d3 1
@


1.10.10.1
log
@MFC the purely cosmetic changes, including removal of $NetBSD$ Ids,
a few spurious #'s, an empty REQUIRE, and a never-used KEYWORD.
@
text
@d3 1
@


1.10.10.2
log
@SVN rev 190216 on 2009-03-21 21:12:16Z by rodrigc

MFC r180318:

Remove the $DUMPDIR variable. It's redundant and the rest of the
script uses $dumpdir directly.
@
text
@d20 5
d61 1
a61 1
	savecore ${savecore_flags} ${dumpdir} ${dumpdev}
@


1.10.10.3
log
@SVN rev 190217 on 2009-03-21 21:16:05Z by rodrigc

MFC r182460:

Add the ability to run /usr/sbin/crashinfo on a new core dump automatically
during boot.  Right now this is disabled by default, but it can be enabled
by setting 'crashinfo_enable=YES' in rc.conf.
@
text
@a56 3
	if checkyesno crashinfo_enable; then
		${crashinfo_program} -d ${dumpdir}
	fi
@


1.10.10.4
log
@SVN rev 196870 on 2009-09-05 18:44:36Z by rodrigc

This set of MFC's brings savecore closer to the trunk version.
Now, crashinfo will only be run if the following conditions are true:
- savecore -C determines that a crash dump exists
- crashinfo_enable="YES"

MFC: 182460

   Add the ability to run /usr/sbin/crashinfo on a new core dump automatically
   during boot.

MFC: 180318

   Remove the $DUMPDIR variable. It's redundant and the rest of the
   script uses $dumpdir directly.

MFC: 180317
   Make checking for the availability of core dumps work in the case
   that $dumpdev is not set to "AUTO".
@
text
@a54 11
	local dev

	case "${dumpdev}" in
	[Aa][Uu][Tt][Oo])
		dev=
		;;
	*)
		dev="${dumpdev}"
		;;
	esac

d56 3
a58 7
	if savecore -C "${dumpdir}" "${dev}" >/dev/null; then
		savecore ${savecore_flags} ${dumpdir} ${dumpdev}
		if checkyesno crashinfo_enable; then
			${crashinfo_program} -d ${dumpdir}
		fi
	else
		[ -z "${rc_quiet}" ] && echo "No core dumps found"
@


1.10.10.5
log
@Switch importer
@
text
@d3 1
a3 1
# $FreeBSD: stable/7/etc/rc.d/savecore 196870 2009-09-05 18:44:36Z rodrigc $
@


1.10.10.4.4.1
log
@SVN rev 216618 on 2010-12-21 17:10:29Z by kensmith

Copy stable/7 to releng/7.4 in preparation for FreeBSD-7.4 release.

Approved by:	re (implicit)
@
text
@@


1.10.10.4.4.2
log
@Switch importer
@
text
@d3 1
a3 1
# $FreeBSD: releng/7.4/etc/rc.d/savecore 196870 2009-09-05 18:44:36Z rodrigc $
@


1.10.10.4.2.1
log
@SVN rev 203736 on 2010-02-10 00:26:20Z by kensmith

Copy stable/7 to releng/7.3 as part of the 7.3-RELEASE process.

Approved by:	re (implicit)
@
text
@@


1.10.10.3.2.1
log
@SVN rev 191087 on 2009-04-15 03:14:26Z by kensmith

Create releng/7.2 from stable/7 in preparation for 7.2-RELEASE.

Approved by:	re (implicit)
@
text
@@


1.10.10.1.2.1
log
@SVN rev 185281 on 2008-11-25 02:59:29Z by kensmith

Create releng/7.1 in preparation for moving into RC phase of 7.1 release
cycle.

Approved by:	re (implicit)
@
text
@@


1.9
log
@When dumpdev is set to 'auto', and a suitable swap device is found,
create a symbolic link /dev/dumpdev designating that device so
savecore can find and save a previous kernel dump.
@
text
@d33 1
a33 1
		dumpdev=/dev/dumpdev
d47 7
a53 2
	if [ ! -e "${dumpdev}" -o ! -d "${dumpdir}" ]; then
		warn "Wrong dump device or directory. Savecore not run."
@


1.8
log
@Remove the requirement for the FreeBSD keyword as it no longer
makes any sense.

Discussed with: dougb, brooks
MFC after: 3 days
@
text
@d32 3
d56 2
a57 2
		echo "Checking for core dump on ${dumpdev} ..."
		savecore ${savecore_flags} ${DUMPDIR} ${dumpdev}
@


1.7
log
@Echo and pass dumpdev as the device argument to savecore.

PR: bin/51655
@
text
@d10 1
a10 1
# KEYWORD: FreeBSD nojail
@


1.7.2.1
log
@RCS file: /home/ncvs/src/etc/rc,v
----------------------------
revision 1.335
date: 2004/10/08 14:23:49;  author: mtm;  state: Exp;  lines: +0 -1
Remove an unused variable.

Submitted by: Pawel Worach <pawel.worach@@telia.com>
----------------------------
revision 1.334
date: 2004/10/07 13:55:25;  author: mtm;  state: Exp;  lines: +1 -1
Remove the requirement for the FreeBSD keyword as it no longer
makes any sense.

Discussed with: dougb, brooks
MFC after: 3 days
=============================================================================
RCS file: /home/ncvs/src/etc/rc.d/nsswitch,v
----------------------------
revision 1.4
date: 2004/09/16 17:03:12;  author: keramida;  state: Exp;  lines: +1 -1
Fix requirement of `network' to `NETWORK' because the former isn't
provided by any rc.d script.

Approved by:	mtm
=============================================================================
RCS file: /home/ncvs/src/etc/rc.d/pflog,v
----------------------------
revision 1.3
date: 2004/09/16 17:04:20;  author: keramida;  state: Exp;  lines: +1 -1
We don't have any providers of `beforenetlkm' in FreeBSD.  Remove the
dependency to it from our rc.d scripts.

Approved by:	mtm
=============================================================================

Approved by: re/scottl
@
text
@d10 1
a10 1
# KEYWORD: nojail
@


1.7.2.2
log
@MFC: if dumpdev is "AUTO", pick the first usable swap device from fstab.
@
text
@a31 3
	[Aa][Uu][Tt][Oo])
		dumpdev=`/bin/realpath /dev/dumpdev`
		;;
d44 2
a45 7
	if [ ! -c "${dumpdev}" ]; then
		warn "Dump device does not exist.  Savecore not run."
		return 1
	fi

	if [ ! -d "${dumpdir}" ]; then
		warn "Dump directory does not exist.  Savecore not run."
d53 2
a54 2
	echo "Checking for core dump on ${dumpdev}..."
	savecore ${savecore_flags} ${DUMPDIR} ${dumpdev}
@


1.6
log
@Mark scripts as not usable inside a jail by adding keyword 'nojail'.

Some suggestions from:	rwatson, Ruben de Groot <mail25@@bzerk.org>
@
text
@d53 2
a54 2
		echo "Checking for core dump..."
		savecore ${savecore_flags} ${DUMPDIR}
@


1.5
log
@Luke Mewburn has indicated that they (NetBSD) are not interested
in keeping the scripts under rc.d in sync with us. So, remove
NetBSD specific stuff (which made our scripts more complicated
than necessary).

The NetBSD ident string will be left intact, both for history and
also incase we wish to pull in future versions.
@
text
@d10 1
a10 1
# KEYWORD: FreeBSD
@


1.4
log
@Luke Mewburn has indicated that they (NetBSD) are not interested
in keeping the scripts under rc.d in sync with us. So, begin removal
of NetBSD specific stuff (which made our scripts more complicated
than necessary), starting with the NetBSD KEYWORD.
@
text
@a18 6
case ${OSTYPE} in
NetBSD)
	rcvar=$name
	;;
esac

d26 7
a32 9
	case ${OSTYPE} in
	FreeBSD)
		# Quit if we have no dump device
		case ${dumpdev} in
		[Nn][Oo] | '')
			debug 'No dump device. Quitting.'
			return 1
			;;
		esac
d34 4
a37 14
		# If there is no crash directory set it now
		case ${dumpdir} in
		'')
			dumpdir='/var/crash'
			;;
		[Nn][Oo])
			dumpdir='NO'
			;;
		esac

		if [ ! -e "${dumpdev}" -o ! -d "${dumpdir}" ]; then
			warn "Wrong dump device or directory. Savecore not run."
			return 1
		fi
d39 2
a40 5
	NetBSD)
		if [ ! -d "${dumpdir}" ]; then
			warn "No /var/crash directory; savecore not run."
			return 1
		fi
d43 5
@


1.3
log
@Convert from `${CMD_OSTYPE}` to ${OSTYPE}. This saves a shell invocation on
OS-dependent case switches.
@
text
@d10 1
a10 1
# KEYWORD: FreeBSD NetBSD
@


1.2
log
@Merge in all the changes that Mike Makonnen has been maintaining for a
while. This is only the script pieces, the glue for the build comes next.

Submitted by:	Mike Makonnen <makonnen@@pacbell.net>
Reviewed by:	silence on -current and -hackers
Prodded by:	rwatson
@
text
@d19 1
a19 1
case `${CMD_OSTYPE}` in
d32 1
a32 1
	case `${CMD_OSTYPE}` in
@


1.1
log
@Initial revision
@
text
@d3 2
a4 1
# $NetBSD: savecore,v 1.2 2000/05/13 08:45:09 lukem Exp $
d9 2
a14 1
rcvar=$name
d16 1
d19 7
a25 1
savecore_start()
d27 1
a27 1
	#	/var/crash should be a directory or a symbolic link
d30 39
a68 1
	if [ -d /var/crash/. ]; then
d70 1
a70 4
		savecore $savecore_flags /var/crash
	else
		warn "No /var/crash directory; savecore not run."
	fi
@


1.1.1.1
log
@Import the NetBSD 1.5 RC system.

Note that `rc' and `rc.shutdown' could not be imported because we already
have files with those names.
@
text
@@


1.1.1.2
log
@Sync with NetBSD's mainline.
@
text
@d3 1
a3 1
# $NetBSD: savecore,v 1.4 2002/03/22 04:16:39 lukem Exp $
a7 1
# BEFORE:  SERVERS
d23 1
a23 1
		savecore $rc_flags /var/crash
@

